01_January 1978
removers work very quickly and usually leave the metal scarred or pitted. Sometimes a light touch with emery cloth will remove heavy rust spots without leaving offensive blemishes. The refinishing of a wooden drum begins with the removal of all of the old paint and lacquer followed by careful sanding, paying special attention to dents and bruises. After final sanding with extra fine sandpaper, apply the new finish using a spray can of appropriate color. Finish the surface with a high gloss plastic or acrylic material, either spray can or brush. The same high gloss can be applied inside the drum shell as an extra measure of protection and for better sound. Peeling of old pearl or "full dress finishes" as they were called can be done using a thin putty spatula. For a replacement pearl or sparkle finish, follow the instructions provided by the supplier of such plastic materials when it comes to cutting, gluing and trimming the pearl. If it is decided to retain the original pearl finish which will have yellowed with age, use automobile type polishing compounds to provide a silky smooth base for a coat of regular wax. Metal drums are often protected with a lacquer which was applied to prevent tarnishing such as that occurring with brass.
Lacquer removers work well followed by buffing with a soft cloth and one of several name-brand metal polishes. Again, hard elbow grease will remove the ravages of time and a small hammer can be gently used to remove dents that have occurred. Care is required in polishing chrome or nickel plated fittings and hoops. Steel wool is too abrasive and will permanently scratch the finish. It is better to use a soft cloth and a metal polish or automotive chrome cleaner. A soft buffing wheel and fine buffing compound will give a new-like mirror finish to old plated parts. The final step in restoring an old drum is to photograph it for insurance protection in case of theft. A photograph will also aid in selling the drum at a later date. Protecting a restored old drum can be reinforced by placing the owner's name in an obscure place such as inside the shell. What is the motivation for searching, finding and restoring an old drum? Pride of ownership? An unusual challenge? An interest in history? A desire to display? Whatever the reason, finding and restoring relic drums can be a lot of fun and an immense satisfaction.
Relic Sonor snare drum. Model 377, World War I vintage, before and after cleaning. Note extra snare system under batter head.